Pairing Poly Rove 30 Handsets and R8 Repeaters

Complete the following steps to pair Rove 30 Handsets and Rove R8 Repeaters to the B2 base station.

Note: As of October 18th, 2023, all handsets and repeaters must be paired by technicians on pro installs or by the customer.

Power on the B2 base station and confirm that the LED is a solid or blinking green.

• If the LED is solid green, then complete the following steps to place the base into pairing mode.
  1. Press and hold the pairing button on top of the base for five seconds.
  2. Once the LED begins blinking green, continue to the next step.
• If the LED is blinking green, then the base is in pairing mode. Continue to the next step.

On the unpaired handset, complete the following steps.

1. Press the Menu button.
2. Select Settings.
3. Select Connectivity.
4. Select Easy Registration.

Result: Once the handset is registered, a Registration Success message displays on the handset.

Repeat this step for all unpaired handsets.

On the base station, press and hold the pairing button for seven seconds.

Result: The LED is solid green. The base station is no longer in pairing mode.

Are you connecting any Rove R8 Repeaters?

• If yes, then continue to the next step to pair the repeaters.
• If no, then no further action needed. All steps complete.

Starting with the repeater that is located closest to the base, complete the following steps.

1. On a paired handset, press the Menu button.
2. Select Settings.
3. Select Connectivity.
4. Select Easy registration.
5. From the Add another device to the system? prompt, select Yes.

Power on the repeater.

Result: Once the repeater is registered, a Registration Success message displays on the handset.

Are you pairing additional repeaters?

• If yes, complete the following steps to register the next repeater.
  1. On the handset, select Yes.
  2. Repeat steps 5 through 7.
• If no, on the handset, select No to exit registration mode.