Use the following steps to install the wireless Contour TV receiver.
Self-Installing a Wireless Contour TV Receiver
Share or Print This Article
Solution
1
Verify your Internet Gateway eWAN is installed and operational. See Self-Installing the Internet Gateway eWAN for details.
2
Complete the following steps to plug in the wireless Contour TV receiver.
- Place the receiver where it will get a strong signal from the Gateway without metal or a wall separating the two.
- Connect the HDMI cord to the HDMI port on the wireless Contour TV receiver and to an HDMI input on your TV.
- Connect the power cord to the Contour TV receiver and to an electrical outlet.
Note: Ensure that the electrical outlet isn't connected to a dimmer or a switched outlet.
3
Complete the following steps to activate the wireless Contour TV receiver.
- Power on your TV.
- Using your original TV remote, press the input or source button and select the HDMI input for the wireless Contour TV receiver.
- Follow the on-screen activation steps to connect the wireless Contour TV receiver to the Gateway.
- Select your wifi network.
- Enter the password and select Confirm.
- Follow the on-screen activation steps to name your device and pair the remote.
Cox Business MyAccount Updates
Cox Business MyAccount Updates
With the new and improved MyAccount portal from Cox Business, you’re in control. Included with your Cox Business services, it’s all right at your fingertips anytime, anywhere.
- Perform a health check on your services and reset your equipment
- Easily configure key features and settings like voicemail and call forwarding
- View your balance and schedule payments
Search Cox Business Support
Search Cox Business Support
Didn't Find What You Were Looking For? Search Here.
